Search

In Stock

MODEL 3000MP ULTRASONIC HOMOGENIZER

The Model 3000MP Ultrasonic Homogenizer delivers up to 300 watts of ultrasonic disruption with precision control from a microprocessor and a graphical user interface displayed on a large LCD display.

The Model 3000MP offers all the advanced engineering features necessary to create a total system for ultrasonic disruption. The compact vertical footprint is ideal for processing samples with volumes less than 250 μl with the Cup Tip and volumes ranging from 250 μl to 2000 ml with a wide selection of titanium tips.

Manual Mode

The operator defines the AMPLITUDE, can enable the PULSER feature, and monitor sample temperature during processing.

Program Mode

The operator can define, store, and recall up to 10 programs. Within each PROGRAM, the AMPLITUDE, PULSER parameters, TEMPERATURE settings for COOL DOWN and SHUT DOWN temperatures, can be defined and stored.

Macro Mode

The operator can define a macro of up to 5 sequences, using any of the 10 stored PROGRAMS with an optional time delay, from 1 second to 99 minutes, between each sequence.

Temperature Controller

With the optional temperature probe, the operator has the ability to monitor sample temperature during sample processing. The operator defined temperature window prevents the sample from overheating.

Upper Compartment

The upper compartment houses the Transducer when utilizing any of the Titanium Tips with the exception of the Cup Tip. The rear access port allows the Transducer cable to exit and connect to the power supply.

Lower Compartment

The clear door permits viewing of the sample, while protecting the operator from accidental slashing and reduces the sound being emitted.

The adjustable sample table allows the operator to change the height of the table so that the Titanium Tip can be submerged into the sample at an optimal position.

RoHS compliant

All BioLogics instrument are built lead free.

VOLTAGE
CATALOG NO.
Model 3000MP, 115V/60Hz
0-128-0001
Model 3000MP, 230V/50Hz
0-128-0002
FEATURES
Processing Volume
Less than 250 μl with Cup Tip
Processing Volume
250 μl to 2000 ml with Titanium Tip
Maximum Tip Diameter
25.4 mm or Cup Tip
Power Output
0-300 Watts
Output Frequency
20 kHz
Amplitude Control
0-100%
Automatic Tuning
Yes
Microprocessor Control
Yes
Pulser
1 to 59 seconds
Timer
1 second to 99 minutes
Temperature Controller
32 to 212 °F (0 to 100 °C)
Temperature Probe
Optional
Sound Chamber
Integrated
Display
LCD
DIMENSIONS
Generator
10.5 in W x 12.0 in D x 23.5 in H
26.7 cm W x 30.6 cm D x 59.7 cm H
Inside Lower Compartment
9.75 in W x 7.75 in D x 17.75 in H
24.8 cm W x 19.7 cm D x 45.1 cm H
Transducer
2.5 in Dia. x 4.0 in L
6.4 cm Dia. x 10.2 cm L
Titanium Micro Tips
For small volume sample processing, the Micro Tips radiate ultrasonic energy with high intensity and have a narrow cavitation field.
Stepped Micro Tips incorporate an aluminum base section where as Tapered Micro Tips utilize the 12.7 mm diameter Standard Tapped Tip (cat no. 0-120-0010).
Micro Tips are manufactured from a titanium alloy and can autoclaved.
Ultrasonic Homogenizer Stepped Micro Tip
Sonicator Tapered Micro Tip
Titanium Solid Tips
For medium to large volume samples, the Solid Tips radiate ultrasonic energy with medium/low intensity and have a wider cavitation field.
Solid Tips are best suited when processing samples containing organic solvents or low surface tension liquids.
Solid Tips are manufactured from a titanium alloy and can autoclaved.
Ultrasonic Homogenizer Titanium Solid Tip
Sonicator Titanium Solid Tip
Titanium Tapped Tips
For medium to large volume samples, the Tapped Tips radiate ultrasonic energy with medium/low intensity and have a wider cavitation field.
Tapped Tips have threaded ends to accept Replaceable Flat Tips, Tapered Micro Tips and Extender Tips.
Do not use Tapped Tips when processing samples containing organic solvents or low surface tension liquids.
Tapped Tips are manufactured from a titanium alloy and can autoclaved.
Cell Disruptor Titanium Tapped Tip
Titanium Extender Tips
Extenders Tips fasten to Tapped Tips of identical diameter in place of the Replaceable Flat Tip.
Extender Tips are recommended when processing samples in tall narrow vessels such as Erlenmeyer flasks.
Two configurations are available, Solid Extender and Tapped Extender Tips. Do not use Tapped Extender Tips when processing samples containing organic solvents or low surface tension liquids.
Extender Tips are manufactured from a titanium alloy and can autoclaved.
Sonicator Extender Tip
Cell Disruptor Extender Tip
Titanium Replaceable Flat Tips
Replaceable Flat Tips fasten to Tapped Tips and Tapped Extender Tips of identical diameter.
Replaceable Flat Tips are manufactured from a titanium alloy and can autoclaved.
Sonifier Flat Tip
Sonic Dismembrator Flat Tip
Titanium Cup Tips
Cup Tips are utilized to process samples in isolation without tip to sample contact, eliminating the possibility of cross contamination.
The Cup Tip is filled with water and fastened to the Transducer in an inverted position. Micro tubes containing the sample are suspended within the water filled Cup Tip.
Ports on the Cup Tip body enable the water to be circulated and or cooled during operation.
Sonicator Cup Tip
Cup Tip Accessories
Continuous Flow Chamber
The Continuous Flow Chamber permits continuous processing of large volume samples.
Ultrasonic Homogenizer Continuous Flow Chamber
Sound Abating Chamber
The SONABOX reduces cavitational sound emitted during processing. These harmonics are produced by the vessel walls and sample surface and can be disturbing with extended operation.
SONABOX Sound Abating Chamber Sonicator

Bestsellers

Special Application Fume Hoods

PVC and stainless steel hoods for use with perchloric acid, acid digestion, and radioisotopes.

Class II, Type B2 (Total Exhaust) Biosafety Cabinets

These total exhaust cabinets protect the user, product and lab. They’re designed to be hard-ducted to the outside, exhausting 100% of the HEPA-filtered air outside the lab.

MODEL 3000MP ULTRASONIC HOMOGENIZER

The Model 3000MP Ultrasonic Homogenizer delivers up to 300 watts of ultrasonic disruption with precision control from a microprocessor and a graphical user interface displayed on a large LCD display. The Model 3000MP offers all the advanced engineering features necessary to create a total system for ultrasonic disruption. The compact vertical footprint is ideal for processing samples with volumes less than 250 μl with the Cup Tip and volumes ranging from 250 μl to 2000 ml with a wide selection of titanium tips.

-86C Classic ULT Freezer

ANTECH -86℃ ULT freezer is designed with single compressor auto-cascade refrigerant system. The key features are realiable temperature, fast cooling down, low engery consumption.The temperature controller is easy to operation which reduces the failure risk of complex control.The interior is made of #304 stainless steel for durable use and easy cleaning.ANTECH ULT freezer can reassure a stable ultra low temperature storage condition to store germs, erythrocytes, leucocytes, viruses and many other biological materials. Installations can be found in research institutes, pharmacy industry, clinical labs, blood banks and laboratories in electronic & chemical plant

MVE SC Series

Over the past 50 years, our product designs have improved through end-user input and evolved into a unique selection of units. The SC Series is designed for the user who has small capacity needs, but requires long-term storage and low liquid nitrogen consumption in a convenient lightweight package. Features Include:
  • Designed for large capacity storage
  • Low liquid nitrogen consumption
  • Convenient lightweight package

8010G & 8010S

The bases on all 8010/8011 series laboratory blenders have epoxy coated motor housing and are complete with either a Stainless Steel container (ES) or Heat Resistant Glass container.

Back to Top
Product has been added to your cart